Wrap-around Bookcases

Just a quick post to show off the bookcases we finally put up in our spare room. You might remember this room from this post I made back in April - at the time I was attempting to sort all my books and make room so we could install the shelves. Well, it took more that 9 months but we did it! We even moved my futon and my old dorm TV in so it's really a guest room now. If you were wondering, the shelves are the Billy system from IKEA.

I'm going to be pretty busy this month so I can't promise that I'll get to post. I still have my dad's cowboy costume to sew and I've agreed to make several more of my Advent calendars. Fun fun!

Halloween Update 2: Saloon Girl, Bar Maid, and Chef Gordon Ramsay

This is my second post about the Halloween costumes I made this year - you can see my first post about the Witch, Princess Leia, and Jedi costumes here.

...

Project Name: Saloon Girl
Time Taken to Finish: 3 weeks
Pattern: Simplicity 2851
What I Did: This was by far the most challenging costume to make. It was constructed from satinette which I have no experience sewing. That made the bodice very challenging because it was difficult to get the satinette to lay flat and match up with the lining pieces. I actually ended up throwing away my original pieces cut from the satinette and buying more fabric, which I then attached to some fusible interfacing before cutting out the pattern pieces. That made everything much easier!

...

Project Name: German Bar Maid
Time Taken to Finish: 1 week
Pattern: Simplicity 2789 (Update 9/8/09: This pattern is now out of print. The closest I could find is Simplicity 4015, View B, Little Red Riding Hood. Take off the hood and change the colors and it would resemble this costume, though it doesn't have the bloomers).
What I Did: This costume was quick and easy (just what I wanted!). I followed the pattern and didn't have any major problems with it.

...

This is my husband as Chef Gordon Ramsay (or just a chef to those who don't know who Chef Ramsay is!). I had planned to sew the chef's jacket myself using this pattern but I ran out of time. Happily, I was able to find a reasonably priced jacket at Chefwear.com. Also nice was that 2 day shipping was only a couple more dollars than the standard shipping so I was able to have it well before Halloween.

...

And are some photos of the costumes from my last post being worn (I've also added them into that post):

Witch


Princess Leia


Princess Leia and Jedi

Halloween Costumes Update 1: Witch, Princess Leia, Jedi

Update 11/17: I've added in photos of the costumes being worn. You can see my second post about the Saloon Girl, Bar Maid, and Chef Gordon Ramsay costumes here.
I've been a little busy lately because of my attempt to sew seven costumes for Halloween this year (only one is for myself, the rest are for friends and family). So far I've finished three, all of them for friends: a cute witch dress, a child's Princess Leia dress and belt, and a Jedi outfit. Here are some preliminary photos and descriptions of the projects (I'll have photos of the costumes on their wearers after Halloween).

Project Name: Witch Dress and Hat
Time Taken to Finish: 1 week
Pattern: Simplicity 2803 (Update 9/8/09: This pattern number has changed to Simplicity 2521)
What I Did: This costume was sewn pretty much according to the pattern. For the peplum (the black thing around the waist) I ended up having to put an extra layer of black under the outer layer to keep the printed inner layer from showing through. For the hat I sewed a little orange belt and attached a buckle, then sewed it to a standard witches hat.

...

Project Name: Child's Princess Leia Dress and Belt
Time Taken to Finish: 4 days
Pattern: Simplicity 4797
What I Did for the Dress: I started with an angel costume from the Simplicity pattern to figure out the size. I altered it so that the body of the dress was all one piece with the only seams being under the arms (there were no shoulder seams). I altered the neck to add a Mandarin collar with a velcro closure and a keyhole opening below the closure to make room for it to go over the head. I made a hood and sewed it into the neck seam on either side of the closure. The sleeves had to be shortened a lot and the extra angel "flaps" were removed (I probably should've started with the standard sleeves, it would've saved me some time!). I left the side seams of the dress unsewn from the knee down to make slits (I did do a little hem on the raw edges).
What I Did for the Belt: I made a pattern out of newspaper for all the pieces based on the belt information at Obi-Wan's Jedi Academy. For the body of the belt I used two pieces of white costume satin with a thick piece of interfacing in between and velcro sewn at either end for closure. For the metal octagons and petagon I used silver fabric attached with fusible webbing. I then hot-glued 3/4 inch button blanks on top of the silver shapes.

...

Project Name: Jedi Costume
Time Taken to Finish: 1 week
Pattern: tunic: Simplicity 5840 pants: McCall 2233
What I Did: This is sort of an "early Obi-Wan" costume (no robe!). The Simplicity pattern did not come with a pattern for pants so I borrowed one from a McCall pattern I had handy.

...

Sewing so many different costumes has been hard work but I'm also learning a lot. I have four more costumes planned: saloon girl, Chef Gordon Ramsay, Heidi/German bar maid, and Gary Cooper from High Noon. The last one is for my dad and might not get finished before Halloween, but he's said he can wait.

Crochet Pattern: Amigurumi Wolf

I've created my first original amigurumi pattern - a wolf. I wanted to crochet a wolf for a friend who was going off to school at the University of Nevada - Reno (their mascot is the wolfpack). But I couldn't find a wolf pattern online that I liked, so I decided to write my own.

Coming up with my own pattern was easier than I thought it would be - I just started crocheting and if I didn't like the way the it was going I just ripped the stitches out and started again. As I crocheted I kept a log of how many stitches I used in each round and made notes if I used any special increases or decreases. This type of pattern was easy for me to read, but when it came time to post it online I realized that many crocheters would have no idea what to do with my crazy list of numbers!

To find out how an amigurumi pattern should be written, I looked online at other free patterns created by bloggers and picked the three that I thought were easiest to understand: Ana Paula's, Planet June's, and Nimoe's. I then used the writing style of these patterns as a guide to how mine should be written. After writing up my pattern properly I tested it by using it to create another wolf.

I hope you enjoy this pattern and I'd love to see photos of any wolves you make using it. If you have any questions or find any errors please let me know in the comments section.

Update 8/16/09: Cissi of Amigurumi på svenska has translated this pattern into Swedish!

Wolf Amigurumi Pattern
Notes on this pattern:

• My patterns are free and may not be sold. Please do not reproduce or repost patterns or instructions from CraftyCattery.com without my permission. For information on selling items created from my patterns, please view the FAQ.
• Probably the most complicated parts of this pattern are the muzzle and tail. The head and body are the typical amigurumi "mushroom" shape and the paws and ears are pretty simple to crochet.
• The finished size of the wolf is about 5 inches sitting, 7 inches standing.

Materials needed:

• Bulky weight yarn in grey, white, and black (I used Bernat Softee Chunky)
• Size H (5.00 mm) crochet hook
• Yarn needle
• Optional: Safety eyes and nose (if the item is intended for children over 3 years)

Abbreviations used in this pattern:

• Rnd = round
• sc = single crochet
• st = stitch
• sts = stitches
• ch = chain
• sc2tog = single crochet two stitches together, aka a decrease. (I recommend using falwyn's invisible decrease.)

The pattern:
Muzzle
Using white:
Rnd 1: 6 sc in magic ring (6 sts).
Rnd 2: 2 sc in each st around (12 sts).
Rnd 3: [2 sc in next st, sc 3] three times (15 sts).
Rnd 4: sc around (15 sts).
Rnd 5: sc around (15 sts).
Rnd 6: sc around (15 sts).
Rnd 7: [sc2tog, sc 3] three times (12 sts).
Rnd 8: [sc2tog, sc 2] three times (9 sts).
Bind off, leaving yarn tail to sew muzzle to head.

Blaze
The blaze is crocheted flat. Using grey:
Row 1: ch 2, 2 sc in second chain from hook, ch 1 turn (2 sts).
Row 2: sc across, ch 1 turn (2 sts).
Row 3: 2 sc in each st, ch 1 turn (4 sts).
Row 4: sc across, ch 1 turn (4 sts).
Row 5: 2 sc in 1st st, sc next two st, 2 sc in 4th st, ch 1 turn (6 sts) .
Row 6: sc across, ch 1 turn (6 sts).
Row 7: sc across, ch 1 turn (6 sts).
Bind off, leaving tail to sew blaze onto muzzle.

Sew blaze on top of muzzle, with short end of blaze positioned just above the point of the muzzle. Use black yarn to embroider nose over end of blaze or attach plastic safety nose. Stuff the muzzle.

Blaze - short end at the right

Blaze sewn to muzzle

Nose embroidered on muzzle

Ear
Make two using grey:
Rnd 1: 4 sc in magic ring (4 sts).
Rnd 2: [2 sc in next st, sc 1] two times (6 sts).
Rnd 3: [2 sc in next st, sc 2] two times (8 sts).
Rnd 4: [2 sc in next st, sc 3] two times (10 sts).
Rnd 5: [2 sc in next st, sc 4] two times (12 sts).
Rnd 6: [2 sc in next st, sc 5] two times (14 sts).
Bind off, leaving long tail. Use tail to sew open end of ear together so it is flat (do not stuff). Leave excess tail to sew ear to head.

Head and Body
Using grey:
Rnd 1: 6 sc in magic ring (6 sts).
Rnd 2: 2 sc in each st around (12 sts).
Rnd 3: [2 sc in next st, sc 1] six times (18 sts).
Rnd 4: [2 sc in next st, sc 2] six times (24 sts).
Rnd 5: [2 sc in next st, sc 3] six times (30 sts).
Rnd 6: sc around (30 sts).
Rnd 7: sc around (30 sts).
Rnd 8: sc around (30 sts).
Rnd 9: sc around (30 sts).
Rnd 10: sc around (30 sts).
Rnd 11: sc around (30 sts).
Rnd 12: [sc2tog, sc 3] six times (24 sts).
Rnd 13: [sc2tog, sc 2] six times (18 sts).

Sew the ears and muzzle to the head, using grey yarn to attach the ears and top of the muzzle and white yarn to attach the lower part of the muzzle. Embroider or attach plastic safety eyes. Stuff head then continue crocheting:

Rnd 14: [sc2tog, sc 1] six times (12 sts).
Rnd 15: [sc2tog] six times (6 sts).
Rnd 16: sc around (6 sts).
(Optional - Rnd 16a: sc around (6 sts). If you’d like a floppy head, do this extra row. If you don’t want a floppy head, leave this row out.)
Rnd 17: [2 sc in next st, sc 1] three times (9 sts).
Rnd 18: [2 sc in next st, sc 2] three times (12 sts).
Rnd 19: sc around (12 sts).
Rnd 20: sc around (12 sts).
Rnd 21: [2 sc in next st, sc 3] three times (15 sts).
Rnd 22: sc around (15 sts).
Rnd 23: [sc2tog, sc 3] three times (12 sts).
Rnd 24: [sc2tog] three times (6 sts).

Stuff body. Bind off and close hole.

Front Paw
Make two using grey:
Rnd 1: 6 sc in magic ring (6 sts).
Rnd 2: 2 sc in each st around (12 sts).
Rnd 3: sc around (12 sts).
Rnd 4: sc around (12 sts).
Rnd 5: [sc2tog, sc 2] three times (9 sts).
Rnd 6: sc around (9 sts).
Rnd 7: [sc2tog, sc 1] three times (6 sts).
Rnd 8: sc around (6 sts).
Rnd 9: sc around (6 sts).
Bind off, leaving long tail to sew paw to body. Stuff paw and sew opening shut.

Back Paw
Make two using grey:
Rnd 1: 6 sc in magic ring (6 sts).
Rnd 2: 2 sc in each st around (12 sts).
Rnd 3: [2 sc in next st, sc 3] three times (15 sts).
Rnd 4: sc around (15 sts).
Rnd 5: sc around (15 sts).
Rnd 6: [sc2tog, sc 3] three times (12 sts).
Rnd 7: sc around (12 sts).
Rnd 8: [sc2tog, sc 2] three times (9 sts).
Rnd 9: sc around (9 sts).
Rnd 10: sc around (9 sts).
Rnd 11: [sc2tog, sc 1] three times (6 sts).
Rnd 12: sc around (6 sts).
Bind off, leaving long tail to sew paw to body. Stuff paw and sew opening shut.

Tail
Note: The tail is crocheted with most of the increases on one side of the tail and most of the decreases on the other so that it will have a curve.
Rnd 1: 4 sc in magic ring (4 sts).
Rnd 2: sc across (4 sts).
Rnd 3: [2 sc in next st, sc 1] twice (6 sts).
Rnd 4: 2 sc in next st, sc 1, sc2tog, sc 2 (6 sts).
Rnd 5: 2 sc in next st, sc 5 (7 sts).
Rnd 6: 2 sc in next st, sc 6 (8 sts).
Rnd 7: 2 sc in next st, sc 2, sc2tog, sc 3 (8 sts).
Rnd 8: 2 sc in next st, sc 2, sc2tog, sc 3 (8 sts).
Rnd 9: 2 sc in next st, sc 2, sc2tog, sc 3 (8 sts).
Rnd 10: 2 sc in next st, sc 7 (9 sts).
Rnd 11: 2 sc in next st, sc 8 (10 sts).
Rnd 12: 2 sc in next st, sc 3, sc2tog, sc 4 (10 sts).
Rnd 13: 2 sc in next st, sc 3, sc2tog, sc 4 (10 sts).
Rnd 14: [sc2tog, sc 3] two times (8 sts).
Bind off, leaving long tail to sew tail onto body. Stuff tail.

Sew front paws on to body below the head. Sew back paws near the bottom of the body. Sew the tail on the back side of the body between the back paws. If wanted, use black yarn to embroider claws on to each paw.

My test wolf (left) and my prototype wolf (right - smaller because he was made with a lighter-weight yarn)

"The Office" Charity Fundraising Video

The United Way and DunderMifflinInfinity.com (aka DMI, NBC's online game for "The Office") are running a Summer Fundraising Initative to help bring in donations to a number of worthy charities.
Each branch of DMI is sponsoring a charity - my branch, Ypsilanti Michigan, has chosen St. Jude's Children's Research Hospital. St. Jude's is a world leader in researching and treating cancer and other diseases in children, so I think it's a charity that everyone can get behind (that's what she said!).
I made the above video hoping to inspire people to give as generously as they can. If you'd like to give to St. Jude's through our fundraiser, you can DONATE HERE. Thanks for your support - every little bit helps!

Chiltepin Plants Update

My chiltepin plants are doing surprisingly well! Out of the 32 I planted so far I've only lost one. Now some of them are outgrowing their tiny potting cups so I'm starting to replant them into large containers. Pots are expensive! I went to every garden center I could find to try to buy large containers that were less than $1 a piece but no luck. I was hoping someone would sell the cheap plastic pots that the nurseries use but I couldn't find them anywhere. I ended up having to order them online from GreenhouseMegaStore.com - they had a bundle of thirty 2.5 gallon containers for $17. Plus $15 shipping that ended up being $32, a little more than $1 a piece.
So far I've replanted eleven of the chili tepin plants in the 2.5 gallon containers today. Right now they're sitting inside my patio door - hopefully they'll get enough sun there. They probably would get more sun outside, but it's the monsoon season here in Arizona. So in addition to surviving the desert heat the plants would also have to make it through the strong winds and heavy rain of the monsoon storms. I think I'll try to keep them inside as long as I can so they can grow big and strong!

Here are some photos I took about once a week of one of the chiltepin plants to track it's growth:

May 31st

June 3rd

June 11th

June 21st

June 30th

July 9th (in the new big pot!)

Update 1/15/09: Unfortunately I had to leave my chiltepin plants outside while I was gone for two weeks over Christmas. We had several hard freezes (and one snow!) while I was away and since I wasn't able to cover them up, they didn't make it. I'm still watering them, hoping maybe they can be revived but it's probably a lost cause. :( I'll just have to start over once it gets warm.

Two More Amigurumi Bears

I've crocheted two more Beary Jackson amigurumi bears. They're so cute! You can see the first Beary I made here and you can find the pattern at Rheatheylia.com.

I crocheted this blue Beary Jackson as a baby gift. The pretty yarn (Caron Simply Soft Baby in Powder Blue) was originally used during the mother-to-be's baby shower to play the game, "How Big Is Mommy?" (each guest cuts a piece of yarn that they think is the diameter of the mother's belly; the closest to the real thing wins). I acquired the leftover yarn and used it to make Beary!

I made this Beary for a friend who fell in love with the first Beary I crocheted. The yarn used was Lion Brand Jiffy in Caffe.

From the back view you can see that I've been adding tails to my Bearys (they're not in the original pattern). His head is pretty big and makes him unbalanced so the tail makes it easier for him to sit without falling over. Here's the pattern for the tail piece for a small Beary:

Tail
Round 1: crochet 4 stitches in a ring (4)
Round 2: increase every stitch (8)
Round 3: stitch across (8)
(If you want the tail to be a little longer you can stitch across another round)
Stuff and sew to Beary.

Since the bears are going to be around small children I decided to make the eyes and nose out of yarn (or embroidery floss for the smaller blue bear). For the eyes, I crocheted little circles then sewed them on; for the nose I just did a little bit of embroidery.

Garter Stitch Baby Blanket

I just finished knitting this baby blanket for a friend who's expecting. It was simple garter stitch, but man, it seemed to take forever! This is my third baby blanket, you can see the first here and the second here.

Project Name: Garter Stitch Baby Blanket
Time Taken to Finish: 2 months
Finished Size: 27 inches by 33 inches (not including fringe)
Type of Yarn Used: Red Heart Soft Baby in Powder Yellow
Amount of Yarn Used: 1 skein (I needed a little extra for the fringe)
Needles Used: US size 10.5 needles
What I Liked About the Project: Since it was garter stitch the knitting was easy.
What I Didn't Like About the Project: It seemed to take forever to knit - I think it was because I was using such thin yarn (it was sport weight). For my previous two baby blankets I used bulky weight yarn which obviously knitted up much faster.

Instructions: Cast on 100 stitches. Knit all stitches until blanket is as long as you'd like (I stopped at 33 inches). Add fringe to two sides - there's a good tutorial for adding fringe at Fiber-Images.com.
Here's a photo of the finished blanket, spread out so you can see the whole thing:

Beef Stroganoff Recipe

I made beef stroganoff for the first time last night.  It was yummy and very filling - I could barely finish my plate!  I got the recipe from my mom and it wasn't too hard to follow.  The only problem I ran into was when I was at the store trying to buy the ingredients.  The recipe called for 1/2 pint of sour cream but ounces were the only measurement listed on the sour cream tub.  I had no idea how many ounces were in a pint so I ran around the store trying to find something that had both pint and ounce measurements on it.  After looking through what felt like half the aisles I finally found a pint can of beer labeled 16 ounces.  That meant that I needed 8 ounces of sour cream.  It wasn't until I got home and started to cook that I remembered the old saying "A pint's a pound the whole world round."  Wish I had thought of that earlier!

Beef Stroganoff
Serves 2-3

- 1 pound round steak cut into 3/4 inch pieces (you can substitute 1 pound of ground beef if you'd like, I think it would still taste pretty good)
- 2 Tbsp shortening
- 1/2 cup chopped onions
- 1 clove minced garlic
- 1-6 ounce can mushrooms (I couldn't find a can that was exactly 6 ounces, I just got the closest I could)
- 1-10 3/4 ounce can cream of mushroom soup
- 1 Tbsp Worcestershire sauce
- 6 drops Tabasco sauce
- 1/2 tsp salt
- 1/8 tsp pepper
- 1/2 pint (8 ounces) sour cream
- flour for coating meat
- egg noodles or rice to serve with the stroganoff

Dip meat into flour and brown in hot shortening.  Add onion, garlic and mushrooms.  Cook until onions are transparent.  Add all other ingredients EXCEPT sour cream.  Simmer on low until meat is tender, about 1 hour, stirring occasionally (if the sauce gets too thick while simmering you can add a small amount of water).  Add sour cream just before serving.  Serve over egg noodles or rice.

Amigurumi: My First Attempts at Crochet

I haven't tried very hard to learn to crochet in the past, but last week I discovered something that made me want to pick it up: amigurumi! Amigurumi is the Japanese word for knitted or crocheted stuffed animals. I LOVE me some stuffed animals and they're great gifts for kids but I've only knitted one before and it was a pain. But it didn't seem like it would be that hard to use crochet to make an animal so I though I'd give it a try.

These are my first attempts. I started out crocheting plain balls using the instructional videos at hookandneedles.com. I experimented with different weights of yarn and various hook sizes. Next I tried my hand at following an animal pattern: a mouse designed by KristieMN of the Crochetville.org forums. I successfully made a large grey mouse and a tiny white mouse:

I was going to continue making little animals but I got an invitation in the mail to a first birthday party for the son of one of my friends. Ambitiously I thought I'd try to crochet him a teddy bear. It was a lot of work but I managed to finish it (about an hour before the party!). The pattern I used was the adorable Beary Jackson at Rheatheylia.com. But since that bear was only about 6 inches tall sitting, I decided to try an enlarged version of the pattern that the creator posted on craftster.org. Here's the result:

I was pretty happy with how he turned out! The only thing I didn't really like was the size of his legs - if I crocheted him again I would make them a little shorter and skinnier. I also had a problem with huge holes appearing where I did normal decreases (mainly around the bottom of his head). I solved this by using an invisible decrease that I learned from a tutorial created by a helpful blogger named falwyn. I can't wait to make some more amigurumi! :)

***

On a different note, there have been a ton of summer projects that have been floating around in my mind lately. I want desperately to start on one of them but sadly there are always other activities that have a higher priority. To keep myself motivated I'm going to list some of them here. Hopefully I can get to everything before fall!

Summer Project List

- Make some of my old t-shirts into tank tops. I live in Arizona so my required summer uniform is a tank top and shorts - otherwise I'd be sweating all day! I have a ton of old t-shirts that I hardly ever wear so I'm hoping that if I can make them into tank tops then they'll get more use. I'd like to find a free pattern that shows how to finish the cut edges so they don't roll (which t-shirt fabric always does).

- Make black-out curtains for our bedroom. Perhaps to give us more time to be out of doors during the cool morning hours, Arizona has decided not to observe Daylight Savings Time. Unfortunately this means that in the summer it starts to get light about 4:30 AM, making it really hard to get enough sleep! I made curtains for the bedroom last winter but they aren't much help since they aren't lined. Right now we are making due with heavy blankets thrown over the curtain rods but we really need some black-out fabric!

- For one week, design a new craft item each day and then blog about it. I've been making things but not designing much of my own stuff lately, plus I'd like to see how hard it is to do a blog entry every day.

- Make another puppet video for The Office. I'm hoping I can get the help of my DunderMifflinInfinity.com branch with this because I am fresh out of story ideas!

- Paint our guest bathroom. I'm thinkin' orange. This probably won't happen because I'm too chicken to commit to any color but white!

***

Finally, for those of you who managed to read all the way to the bottom, here's a funny video I recorded of my cat reacting to my attempts to play the ocarina. Enjoy!

My First Commission: Three Knitted Scarves

I knitted these three scarves for my mom - she's going on a trip to England and will be staying with some friends for a few days so she wanted to give them a gift.  I guess the scarves aren't technically a commission because she's not paying me with money.  Instead she's promised to get me an awesome souvenir - I can't wait to see what she picks out! :)

Project Name: Simple Scarves
Time Taken to Finish: about 2 hours each
Materials Used: 1 ball each of Lion Brand Homespun Yarn in: Barley, Granite, and Edwardian (left to right in the photo)
Special Tools Used: Size 13 knitting needles
What I Did: Cast on 10 stitches.  Knitted until scarf was about 5 feet long.  Cast off stitches and weaved in ends.
What I Liked About the Project: I love projects that only use knit stitch, I can just knit without having to count or think about it.
What I Didn't Like About the Project: I can't think of anything, it was easy and fun! :)

Quail Nest and Chiltepin Seedlings

I was very excited to discover that quail have built a nest in the middle of a cactus in our yard!

They chose a good spot! It would be impossible for a cat or dog to get through cactus that encircles the nest. It took me a long time to get a good photo of the nest because the mother quail is usually sitting on the eggs and all you can see is a few feathers. I can't wait to see the chicks; hopefully she'll take good care of them and keep them out of the street!

I've been on the hunt for chiltepin plants (aka chili tepin). It's a chile plant that has tiny little peppers that are super-hot and can grow year-round in the right conditions. My parents have had one in their backyard for years and I thought it would be nice to have my own. I especially like that it can survive during the winter since I'm not too keen on having to re-plant vegetables every year!

The chiltepin plant is very similar to the chili pequin so initally I wasn't sure which one this was. The only difference I can see between the two is that the chiltepin peppers are round while the chili pequin peppers are elongated. Since the peppers on my parents' plant are round, I'm assuming that it's a chiltepin.

I stole a few peppers from my parents' plant a year ago and, after drying them out, spent a week attempting to sprout the seeds from one pepper but had no luck. I then tried to find the plant at a local nursery but no success there either. Finally I sat down, did some research and discovered that the seeds can take up to 12 weeks to sprout! I decided to try again since I hadn't given them enough time during my first sprouting attempt.

On April 30th I cut open one of the peppers and soaked the seeds in water overnight. On May 1st I put all the seeds (there were more than 30!) between two damp paper towels in a plastic container. I sprayed the paper towels daily with water to keep them moist. Nothing happened until May 20th - I got home from a short vacation and found that several of the seeds had sprouted!

Once the seedlings were free of the seeds, I planted them in plastic cups. I used two cups for each seedling, one inner cup with holes punched in the bottom and an outer cup to catch any drained water. I put a thin layer of pebbles at the bottom of the cup and filled the rest with a 4 to 1 mixture of potting soil and perlite.

I've been planting 2-3 seedlings a day since May 20th and I now have 17! They seem to be pretty slow growers so I'm guessing they won't be big enough to have peppers until next year. Here are some photos I took of one of the first plants to show its progress:

May 20th:

May 21st:

May 23rd:

May 29th:

You can see more "growth" photos of my chiltepin plants here: Chiltepin Plants Update